Prakash World's

  Nepal is the ultimate destination for the Trekking. Hiking and Trekking in Nepal is as much as cultural experience as a Himalayan adventure. The hills of Nepal are popular for hiking. Hiking provides you with spectacular views of the mountains and the deep valleys, as well as a chance to become acquainted with the Nepali people’s lifestyle, their art, architecture and cultural traditions. There are many popular areas for one or two day hikes. Kakani is popular for panoramic mountains views of Annapurna (8091m/ 26,545ft), Manasalu (8165m/ 26,781ft), Ganesh Himal (7446m/ 24,422ft), Lantang lirung (7245m/ 23,763ft) and 20 other mountains over 6000 meters (19,680ft) above sea level. You can also see the natural beauty of the Kathmandu Valley, the people and their culture and traditions. This is a one day trip from Kathmandu.

Steps to create Domain Controller:( server) 1. Install server Operating system   2.Set IP address for domain controller. Give same IP address in preferred DNS server. 3.Install DNS (Domain Name System)    Go to Control Panel / Add or Remove Programs / Add or Remove windows components / Open networking services and select DNS / Click on OK / Next  (CD is needed for the purpose of installation ) 4. Install Active Directory  Go to run. Type domain controller promotion   In welcome screen click Next  Click on domain controller for a new domain  Click on domain in a new forest  Give the new domain name  Give the net bios domain name  Click on Next  Shared system volume:Next  Select on the Install and configure the DNS server on this computer / Next  Choose option permission compatible only with windows 2000 Click on Next  Finish the Restart   

Applying DHCP on Workgroup Network: Dynamic host Configuration Protocol can be used to assign Automatic (Dynamic) IP Addresses to all computers in the network. But for this at least one computer must have windows server operating system installed and it must be configured as a DHCP server. Steps: 1.     First DHCP must be installed on the Server. Open control panel  Add\Remove programs  select option Add\Remove windows components  from the list double click on networking services and select DHCP and click ok  next to install. (We will also require the server CD during installation) 2.     Then DHCP can be found in control panel administrative tools DHCP 3.     Open DHCP  right click on the computer name and select option New Scope. 4.     Click on Next and type a name for the DHCP scope and if necessary a description also.  Next 5.   ...

ICS (Internet connection Sharing) This is used to share a single Internet Connection among all computers in the network. This is the preferred method of accessing the Internet in networks. But heavy usage can slow down the speed of the Internet Connection. To achieve this, a computer has to be configured as the ICS Server where all internet requests will be sent and received. This is the computer to which the internet line is directly connected to. In case of dial up internet this computer will require a modem or in the case of cable internet it will require two network cards . Steps: 1.First in the ICS server after the internet line is connected a dial up has to be created.Right click on My Network Places Properties   2. Select option Create a New Connection Next  3. Select Option Connect to the Internet Next  4. Select your connection type from the following options Next Connect using a dial up modem.( This is for internet connection throu...

Printer sharing This is the method which can be used to all computers print to the same print device. Where printer is concerned three terms need to be remembered: Printer: This relates to the driver software of the print device and not the actual printer. Print device: This defines the actual physical device which does the printing. Print Server   This defines the computer to which the printer is physically connected. In case of a network all print request are received by this computer and it will then forward it to the print device. Installing a Printer Modern print devices come with an installation CD which is used to install the software required to run the print device. Old version printers can be installed from the control panel à Printers applet. Steps to install a local printer in the Print Server: (Method For Legacy Printers) 1. Open Control Panel | Printers and faxes | Click on option Add a Printer. 2. In the ...